Infinity USB Smart

Product Information

Infinity USB Smart (suitable as an external USB card reader works the same as Smargo)

Infinity USB Smart can be used as either a Phoenix / Smartmouse programmer (3.58/3.68/6.00Mhz) or as an external USB card reader (for Linux receivers such as Dreambox) it works the same as a Smargo SmartReader+

Description:

The Infinity USB Smart is a HID USB smartcard interface, creating a virtual com port on the PC through the Infinity USB Smart software.
There are three distinct features of the Infinity USB Smart.

The first feature is that it does not require any drivers to install on Windows. Once the device is plugged into the USB port Windows will automatically install the required drivers.

The second distinct feature of the Infinity USB Smart is that it has the capability of installing a new firmware-module in the device and then change the switch located on the bottom of the programmer to activate it. Once the switch is switched to “module”-mode the device will re-enumerate as a completely new USB device which can support any smartcard / USB feature that the original Infinity USB Smart module does not. For instance, if it is preferred to run a virtual com port without any software running on the host (for instance on a Linux host) then a module can be installed in the device, which will present itself as a real USB-virtual com port. Using the module feature will usually require drivers that matches the new features.

The third and last feature of the Infinity USB Smart is the round/dome compact design with an upright position of the smartcard inserted. This upright position of the smartcard presents the card visually towards the user. The LED located just in front of the smartcard, gives the user a visual status and also illuminates the card slightly.
Page

USB Lead Included.

• Tell a Friend